Learning Outcomes

Overview of Stations

Protective Relaying

Transformers

Lesson Summary

In this module, you will be introduced to the layout of the elements of a substation. You will study high voltage switch configuration, elements of protection and control, protection of relay schemes and faults that cause the failure of protective schemes. You will also learn about electrical system structure and relaying terminology.

Surge Protection

High Voltage Breakers and Auto Reclosing

Overcurrent Protection

Differential Protection

Relay Operation

Safety of lives and property is key in power systems operation. In this module, you will study the functions of surge protective equipment, the operation of fuses, circuit breakers, breaker control and auto reclosing. You will also learn about instantaneous overcurrent protection, timed overcurrent protection, differential protection and relaying.

Protection and Control: High-Voltage Power Circuits - Assessment

This free online course teaches you how to keep high-voltage power circuits protected so that they operate optimally.

Protection and Control: High-Voltage Power Circuits

Delivery of electrical energy to the end-user is a critical service and must be appropriately managed. Discover how to set up power stations, configure switches correctly, the elements of system protection, relay schemes, breaker control and electrical faults with this course. In addition, you will learn about electrical system structure, the different types of fuses, and how transformers are configured, connected and cooled.

Electricity can be destructive when handled inappropriately and the importance of prioritising safety cannot be over-emphasized. This course will give you a good overview of managing electrical systems efficiently, thereby ensuring that value is delivered to the end-user safely. You begin by exploring the elements of a substation, and how they are segmented and configured for optimal operation. Supervisory control and data acquisition (SCADA) is essential to the modern-day operation of power substations, so you will learn how it works. You will be shown the open profile for air-insulated switchgear (AIS) and enclosed or gas-insulated switchgear (GIS) under high voltage switch configuration. Investigate the effect of cost, reliability, flexibility, and maintainability for optimal selection and setup. Then explore system protection and control elements, including breakers, switches, battery banks and relays. 
The purpose of protective relaying is to ensure that faulty power equipment is removed from service quickly to minimise equipment damage, limit the effects of disturbance and maintain the stability of systems. This course will take you through an extensive study of relaying in general. You will examine the purpose of protective relaying, protection requirements for systems, failure of protection schemes, fault characteristics and types of electrical faults. You will also study basic electrical system structure, devices in a power system, instrument transformers, potential transformers and polarity. Three-phase power distribution has become standard, and knowing how it works will help you understand its advantages over single-phase power. You will discover what causes the failure of high-voltage transformers, as well as learn about transformer construction review, voltage classification and cooling. Surge protectors guard against voltage spikes in electrical equipment. In contrast, circuit breakers keep wires from catching fire due to an overload of amps (amount of electrical current). In this light, you will review surge protective equipment and types of breakers and their characteristics. Study the schematics and general requirements of control circuits. This includes control closing, control tripping, trip-free, anti-pump and reliability in breaker control circuits. 
The next step up from protection by fuses and involving relays is the instantaneous and time overcurrent protection. You will learn what differentiates the two and where you can best apply them in the power grid. The final stage of the delivery of electricity to the end-user is distribution. Understand how distribution networks operate and the schematics of low-voltage feeder protection. You will also learn about the causes of feeder faults and protection essentials for transmission lines such as graded overcurrent protection, differential protection and more. This course examines the different aspects of impedance relaying, the mho type distance relay, impedance zone tripping and permissive overreach transfer trip (POTT). Finally, look at the working of some relays that are in use across different utilities. Empower yourself by enrolling in this course now.

12 Best JavaScript Courses for 2025: Create Interactive Websites

After Academia and Finance, Coursera Turns to Amazon for its Next CEO

Duolingo Q1 2026: Toward 100M DAUs with Record Engagement and Slower Paid Growth

How GenAI Costs Sank Duolingo’s Stock 20% (A Non-AI Generated Analysis)

Chinese Edtech Pivots: Well-rounded Education, Hardware, Agriculture E-commerce, Fast-Food, Garments, and More

6 Best Node.js Courses in 2025

6 Best Site Reliability Engineering Courses to Take in 2025

7 Best Reverse Engineering Courses for 2025

Beginning to Program: Review of CS50 Scratch Course

[2025] 470+ Hours of Free LinkedIn Learning Courses with Free Certification

Chasing 100M Daily Users, Duolingo Reconsiders Ads, Paying Influencers, and Its Most Expensive Plan

Class Action: 50,000 Seek Payouts, Costing Coursera, Udemy Millions

The Series Finale of Online Education: Coursera Acquires Udemy

Duolingo’s Q4 2025: Record Revenue, Record Stock Drop, One Massive Buyback

6 Best Free OCaml Courses for 2025

6 Best Penetration Testing Courses in 2025

Aims & Objectives of ISO/IEC 17025:2017

Accrediting to ISO/IEC 17025:2017

Main Sections of ISO/IEC 17025:2017

This module presents the fundamental aspects of ISO/IEC 17025:2017 along with its aims and objectives. The module also explains different forms of standardized verbs used throughout the standard. Moreover, you will also learn the benefits of accrediting to ISO/IEC 17025. Lastly, an overview of the section's standard is also given.

General and Structural Guidelines for Laboratories

Resource Requirements for Testing Laboratories

Contracts, Validation, Sampling & Handling

Technical Records, Uncertainty, Results Validity, & Reports

In this module, you will encounter the essential requirements given in clauses 4, 5, 6, and 7 of ISO/IEC 17025;2017. However, the explanation of Clause 7 is provided till sub-clause - 7.8. Through this module, you will learn about the general, structural, resource, and process requirements of ISO/IEC 17025:2017.

Information Management, Complaints & Nonconformities (NCs)

Management System Requirements

Taking Corrective Actions

In this module, you will see discussions on ISO/IEC 17025:2017 beginning from sub clause 7.9 that puts forward the complaint requirements put forth by the standard. Furthermore, it presents the standard's requirements regarding management systems. Moreover, it also contains necessary measures to be taken for corrective actions.

ISO/IEC 17025:2017 - Laboratory Management System- Course Assessment

Learn about laboratory management systems laid out by the ISO 17025 international standard in this free online course.

ISO/IEC 17025:2017 - Laboratory Management Systems

This short course is designed for individuals and laboratories looking forward to their standardisation. We explain management standards defined by the ‘ISO/IEC 17025 general requirements for testing and calibration laboratories competence’ devised by ISO. This comprehensive course explains all the basic and essential requirements of the standard. It also provides a simplified clause-by-clause explanation of its four main sections.

Fundamentals of Pest Control

Pest Identification and Assessment

Non-Chemical Pest Control Methods

Chemical Pest Control Methods

This module will teach you the fundamentals of pest control, types of pests and their impact, pest life cycles and behavior, factors influencing pest infestations, pest identification and assessment, non-chemical pest control methods, genetic control and sterile insect, chemical pest control methods, and integrated pest management (IPM) approach.

Monitoring and Prevention

Sustainable Pest Management

Urban and Structural Pest Control

Topics you will learn in this module include but are not limited to pest monitoring techniques, preventive measures and exclusion strategies, ecological impact of pesticides, selective pesticide use and resistance management, organic and biodynamic pest management, pest management in residential areas, and commercial and industrial pest control.

Pest Control and Management - Assessment

This free online course teaches you how to use chemical and non-chemical pest control techniques to manage infestations.

Pest Control and Management

Pests make environments unhygienic and are a major cause of diseases, some of which may be lethal and difficult or expensive to cure. Effective pest management and control are necessary to keep a living and working environment free from health hazards. This course provides the knowledge and skills required to establish and maintain a successful pest control management programme and describes various pests, their life cycles and their behaviour.

Foundations of Construction Safety Management

Safety Management for Hazardous Environments

High-risk Site Activities and Demolition Safety

This module covers risk identification and mitigation in construction work and how to evaluate and manage risk in compliance with CDM regulations. You'll also learn how behaviour affects safety on construction sites, including safety measures for scaffolding, excavation, demolition and more.

Course Assessment - Site Management Safety Training Scheme (SMSTS)

Learn how to manage safety on construction sites in accordance with UK legal provisions in this free online course.

Site Management Safety Training Scheme (SMSTS)

Construction workers are often vulnerable to injuries and hazards so ensuring safety is maintained consistently is crucial for both site managers and workers. This course covers the essential knowledge needed for maintaining safety on construction sites. You'll learn to identify and assess risks while adhering to UK industry regulations. In addition, we'll discuss safety measures to take during erecting scaffolding, excavations and demolitions.

Introduction to Hot Work

Classification of Hot Work Areas

Roles and Responsibilities

Hot Work Permit

Hot Work Risk Assessment

Essential Safety Precautions

This module will familiarize you with hot work processes, including their potential hazards and safety precautions. You'll learn how to assess the risks associated with hot work and determine appropriate control measures. You'll also understand the hot work permit system and the roles & responsibilities of those involved in the permitting process.

Hot Work Safety - Course Assessment

Learn how to manage the hazards associated with hot work processes in this free online health and safety course.

Hot Work Safety

This hot work safety training equips you with the essential knowledge to recognize and mitigate hot work hazards. You'll understand the hot work risk assessment process and hierarchy of controls for effectively reducing risks. The course explains the hot work permit system along with the roles and responsibilities of those involved in the permitting process. You'll also gain a clear understanding of hot work permitted and prohibited areas.

Introduction to Traffic Marshalling

Traffic Management

Temporary Traffic Control

Traffic Risk Assessment

Vehicle Signaling

Reversing Vehicles

Health and Safety

In this module, we will look at the fundamental objectives of traffic marshalling and the general duties of a traffic marshal. A traffic marshal's responsibilities when controlling traffic on a highway or construction areas shall be examined. Assessing risks along with health and safety concerns of traffic near construction areas will be assessed.

Construction Safety: Traffic Marshalling - Course assessment

Train as a traffic marshal or bankman who provides traffic management on construction sites in this free online course.

Construction Safety: Traffic Marshalling

This course takes an in-depth look at the role of traffic marshals on construction sites. Traffic management is important to maintaining health and safety as the presence of heavy machinery and large vehicles creates a need for the efficient direction of traffic. Traffic management in such a busy area faces hazards and safety risks, which we identify in this course. Sign up to train as a traffic marshal or bankman and add a skill to your CV.

Introduction to the AS Standards

Organization's Context and Leadership

QMS Planning and Support

This module introduces students to the AS standards for suppliers of the aviation industry. It explains the importance of regulations in the aerospace industry and navigates them through the journey of different AS standards. It also explains the requirements of Clauses 4, 5, 6, and 7 of this standard.

Organizational Operations

Operations and Evaluation

Organizational Improvement

This module explains the requirements of Clauses 8, 9, and 10 of AS9100D. These requirements are regarding organizational operations, evaluation, and continuous improvement of the organizational operations.

AS9100D Quality Management System (QMS) for Aerospace Industry - Course Assessment

Learn the requirements of AS9100D for the developers and suppliers of components for the aerospace & defense industries.

AS9100D Quality Management System (QMS) for Aerospace Industry

This course explains different clauses and their various requirements for the organizations that develop, design, or supply parts, components, and assemblies concerned with the aerospace and defense industries. After enrolling, the students will be able to navigate the differences between the different versions of the AS standards. Moreover, they will also get a simple and straightforward explanation of this standard's requirements.

Introduction to Hazardous Materials Handling - Learning Outcomes

Understanding Hazardous Materials

Legal and Regulatory Compliance

Importance of Hazard Communication

Risk Assessment and Management

Personal Protective Equipment (PPE) for Hazardous Materials Handling

Introduction to Hazardous Materials Handling - Lesson Summary

In this module, participants will have a solid foundation in understanding hazardous materials, legal and regulatory compliance, hazard communication, risk assessment, and the proper use of personal protective equipment. This knowledge is essential for creating a safe and compliant working environment in industries dealing with hazardous materials.

Hazardous Materials Storage and Transportation - Learning Outcomes

Proper Storage Practices for Hazardous Materials

Managing Segregation and Compatibility of Hazardous Materials

Emergency Preparedness for Hazardous Materials Storage

Transportation Regulations

Handling Hazardous Materials in Transit

Emergency Response Planning

Case Studies and Lessons Learned

Hazardous Materials Storage and Transportation - Lessons Summary

This module covers storing hazardous materials, segregation and compatibility, and developing emergency response plans. Learn DOT regulations, proper labelling, packaging, and security measures for transportation, best practices for loading/unloading and case studies.

Advanced Hazardous Materials Handling Techniques - Learning Outcomes

Decontamination Procedures

Confined Space Entry Protocols

Managing Hazardous Waste

Best Practices for Chemical Spill Response

Continuous Improvement in Hazardous Materials Handling

Advanced Hazardous Materials Handling Techniques - Lesson Summary

This module covers decontamination techniques to ensure health, safety, and regulatory compliance. Learn to manage decontamination zones, handle confined space hazards, and apply physical, chemical, thermal, and radiological decontamination. Develop skills in PPE selection, emergency response planning, and environmental protection.

Hazardous Materials Handling Mastery - Course Assessment

Gain expertise, ensure safety, and excel in hazardous materials handling with this comprehensive free online course.

Hazardous Materials Safety Specialist

This course covers the classification, legal compliance, and risk assessment of hazardous materials. It delves into communication standards, PPE usage, and storage guidelines. Transportation regulations and emergency response planning are also covered. Advanced techniques include decontamination, confined space entry, hazardous waste management, chemical spill response, and continuous improvement through safety audits and case studies.